Hands-Free Lighting Where the Job Is
JLG05 LED work gloves put the light source exactly where the work is. Four high-intensity LED pods sit across the knuckles, so the beam falls on whatever your fingers are handling instead of on the floor. Electricians, plumbers, mechanics and night patrol crews keep both hands on the task and stop reaching for a handheld flashlight.
These are built as work gear first. The back of the hand uses a smooth, abrasion-resistant matte fabric, the palm carries a honeycomb anti-slip silicone print, and a Velcro wrist strap holds the fit steady during overhead and close-quarters work.
Three Lighting Modes From One Button
A single button runs the whole light system, so you can change modes by feel without looking down:
- Steady Light Mode – Press once for a constant, stable beam. Best for detail work that needs uninterrupted light.
- Slow Flash Mode – Press again for a slow pulse that works as a warning light around traffic or machinery.
- Fast Flash Mode – Press a third time for a rapid strobe for emergency signalling and high-visibility situations.
- Power On / Off – Long press for 3 seconds to turn the lights on or off.
Built as Work Gear, Not a Sports Accessory
Quad-LED Knuckle Array – Four white LED pods are set into the knuckle area and aimed forward. Because the light comes from your hand, it follows your hand into cabinets, panels and engine bays where a headlamp cannot reach.
Honeycomb Anti-Slip Palm – The palm carries a dense silicone print in a honeycomb pattern. It holds tools, pipework and handlebars even when your hands are damp or oily.
Adjustable Velcro Wrist – The strap tightens the cuff to your wrist so the glove does not shift while you work overhead or pull on a wrench.
Work-Grade Matte Back – The back of the hand uses a smooth matte fabric that resists abrasion, wipes clean at the end of a shift and does not snag on rough surfaces.
Where JLG05 Gets Used
- Electrical repair – Working inside distribution panels where light must be aimed at the terminals.
- Pipeline and plumbing work – Tightening fittings in basements, risers and under-sink cabinets.
- Motorcycle and bike repair – Working on chains, brakes and engines in a dark garage.
- Night patrol and security – Hands-free visibility plus a flash mode for signalling.
- Outdoor and camping – Setting up camp, fishing or walking after dark.
- Brands and distributors – Private-label and OEM/ODM programs for workwear and safety ranges.
Lighting Gloves, Not Heated Gloves
JLG05 is a lighting glove. It has no heating element. If your program needs warmth rather than illumination, see the J ONE heated glove range, which we manufacture on the same factory floor.
OEM / ODM Customization
J ONE manufacturers heated and LED wearable products for global brands, importers and distributors. JLG05 is a ready production platform that can be adapted to your program:
- Branding – Custom logo, label, hangtag and retail packaging under your brand.
- Materials – Palm print pattern, fabric weight and colourways adjusted per order.
- Lighting – LED output, beam angle and mode sequencing tuned to your requirements.
- Size runs – Custom size ranges beyond the standard run.
- Compliance – CE, RoHS and FCC documentation available upon request.
Send our engineering team your target specification and we will prepare a sample and quotation.
Care Instructions
- Wipe the glove surface with a damp cloth after use.
- Do not machine wash or tumble dry.
- Remove the battery before long-term storage.
- Store in a cool, dry place away from direct sunlight.
- Recharge fully before extended storage.
Package Contents
- 1 x Pair of JLG05 LED Work Gloves
- Rechargeable batteries
- Charging cable
- 1 x User Manual
Specifications
| Specification | Details |
|---|---|
| Type | Rechargeable LED Work Gloves |
| Light Source | 4 High-Intensity White LED Pods (Knuckle-Mounted) |
| Lighting Modes | Steady Light / Slow Flash / Fast Flash |
| Control | Single Button (Press Once to Switch Modes, Long Press 3s for Power On/Off) |
| Battery | 3.7V Li-Polymer, 200mAh (Dual Rechargeable, Replaceable) |
| Palm | Anti-Slip Silicone Honeycomb Print |
| Back of Hand | Work-Grade Matte Abrasion-Resistant Fabric |
| Wrist Closure | Velcro Adjustable Strap |
| Size | S / M / L / XL / XXL (Standard Global Fit) |
| Certifications | CE, RoHS, FCC |
| Customization | OEM / ODM (Logo, Packaging, Colourways, Size Runs) |
FAQ
How do I switch between the lighting modes? Press the button once to cycle through Steady Light, Slow Flash and Fast Flash. Long press the same button for 3 seconds to turn the lights on or off.
Is JLG05 a heated glove? No. JLG05 is a lighting glove and has no heating element. J ONE manufactures a separate heated glove range for warmth-sensitive work.
What sizes are available? JLG05 is offered in S, M, L, XL and XXL as standard. For other size runs or a custom fit, contact our team – we support OEM/ODM sizing.
Can I order JLG05 with my own branding? Yes. J ONE supplies JLG05 for private-label and OEM/ODM programs, including custom logo, packaging and colourways. Send us your specification and we will return a sample and quotation.
Are replacement batteries available? Yes. The battery is replaceable and separate from the glove. Contact our team for spare batteries or charging accessories for your market.
Reviews
There are no reviews yet.