Made for the Coldest Shifts
JHB10 men’s heated winter work boots are built for people whose job does not stop when the temperature drops – ski resort technicians servicing lift equipment, site patrol walking the perimeter, utility crews working outdoor panels, security staff on overnight rounds. The boots look like serious black leather work footwear, with a lace-up upper, a deep-lug sole, and one quiet advantage on the side of the shaft: a power button that turns your footwear into part of your cold-weather gear.
Walking and standing on snow for a full shift pulls heat out of your feet faster than any insulated boot can replace it. JHB10 adds active electric heating on top of the insulation, so your feet stay in the game from the first job of the morning to the last check of the night.
Full-Grain Leather, Built to Work
The upper is cut from first-layer cowhide leather that shrugs off snow, slush, and daily abrasion, with a padded collar at the ankle that keeps out drifting snow without restricting your stride. The lace-up closure with metal eyelets and hooks lets you dial in a secure fit over work socks, and the rear pull tab makes the boots quick to pull on at the start of a shift.
Underfoot, the deep-lug rubber sole grips packed snow, icy walkways, and wet pavement, and the compound stays flexible in low temperatures – because a stiff sole is the last thing you want on an icy ladder or a sloped service road.
Warm from the Inside
Inside, a full wool lining lines the footbed and ankle, holding warmth between heating cycles and wicking moisture on active shifts. The combination of wool insulation and on-demand heating means the boots stay comfortable whether you are hiking between job sites or standing still at an outdoor panel.
Three Heat Levels, One Button
A single press of the side button cycles the heating through three levels, and the LED color shows where you are – red, blue, or green – so you can adjust without taking off your gloves. Heating spans the foot from toe through instep, targeting the zones that go numb first during long outdoor shifts.
Exact temperature ranges and runtimes for each level are listed in the Specifications table below.
Where JHB10 Earns Its Keep
- Ski resort & mountain operations – lift maintenance, snowmaking, and slope crews who stand on snow all day.
- Site patrol & security rounds – long walking routes in the coldest hours, when footsteps are the job.
- Utility & maintenance crews – outdoor panels, meters, and equipment serviced in winter conditions.
- Loading docks & logistics yards – shifts that move between cold storage, docks, and open yards.
- Cold-sensitive workers – anyone whose feet suffer all winter on the job, including people with poor circulation.
- Brands & distributors – JHB10 is available for OEM/ODM private-label programs.
Charging & Package Contents
- Both battery packs are removable and charge at the same time with the included dual wall charger – plug in overnight and the boots are ready for the next shift.
- Remove the batteries before cleaning; wipe the leather upper with a damp cloth and condition it occasionally.
- Let the wool lining air-dry naturally; keep the boots away from direct heat.
- Package: 1 pair of boots, 2 rechargeable battery packs, 1 dual wall charger, 1 user manual.
OEM / ODM Customization
J ONE builds heated footwear for global brands, distributors, and private-label buyers. JHB10 can be adapted to your program:
- Branding – your logo, labels, and packaging.
- Design – leather grade, collar style, shaft height, and closure options can be adjusted.
- Heating system – battery capacity, control logic, and temperature curves tuned to your market.
- Compliance – CE, RoHS, FCC, ETL, UN38.3, and MSDS documentation available upon request.
Send us your target specifications and we will arrange a sample and quotation.
Specifications
| Specification | Details |
|---|---|
| Type | Men’s Heated Winter Work Boots |
| Material (Outer) | First-Layer Cowhide Leather |
| Material (Lining) | Full Wool Lining with Plush Fleece |
| Heating Zones | Full Foot (Toe to Instep) |
| Temperature Control | 3 Levels with LED Indicator (Red/Blue/Green) |
| High | 60-65C (140-149F) / 3-4 Hours |
| Medium | 50-55C (122-131F) / 5-6 Hours |
| Low | 40-45C (104-113F) / 7-8 Hours |
| Battery | 3.7V Li-Polymer, 4700mAh (removable) |
| Charger | Dual DC Wall Charger (included, charges both simultaneously) |
| Sole | Anti-Slip Rubber with Deep Lug Treads |
| Closure | Lace-Up with Metal Eyelets & Hooks |
| Features | Side Power Button, Pull Tab, Padded Collar |
| Size | EU 38-46 |
| Certifications | CE, RoHS, FCC, ETL, UN38.3, MSDS |
FAQ
How do I turn the heating on? Press the button on the side of the shaft. Each press cycles through the three heat levels and off, and the LED color shows which level is active.
Are these boots suitable for full walking shifts, not just standing? Yes. JHB10 was designed around winter work: patrol routes, job-site walks, and yard shifts. The heating adds warmth on top of the wool lining, and the deep-lug sole keeps its grip on snow and ice.
Can I wear thick work socks with them? Yes. The lace-up closure with metal eyelets and hooks adjusts over heavy socks, and the padded collar seals the opening against snow.
How do I charge the batteries? The battery packs are removable. Take them out and charge both at once with the included dual wall charger – typically overnight, ready for the next shift.
Are the boots waterproof? The full-grain leather upper handles snow and slush from normal work, but the boots are not made for submersion. For deep slush or standing water, use waterproof overshoes.
What sizes are available? JHB10 is offered in a full European size run; the exact range is listed in the Specifications table above. Other size runs can be discussed under OEM/ODM terms.
Reviews
There are no reviews yet.