JHG03 Full-Leather Heated Ski Gloves

J ONE JHG03 leather heated ski gloves are built on a full goat-skin leather shell for brands and distributors, with heating across all five fingers, conductive leather fingertips and a three-level controller.

Full-Leather Ski Glove Platform for Brand and Distributor Programs

JHG03 is a leather heated ski glove built on a full goat-skin leather shell, not a fabric shell with a leather palm patch. Heating runs across all five fingers and the back of the hand, driven by a 7.4 V system and a single three-level button set into the back of the hand. The glove is produced to a brand’s specification: leather type and thickness, stitching colour, heating layout and output, controller form, cuff hardware, sizing, logo application and packaging are all set per project, so one pattern can serve as an entry leather style or as a premium technical model.

Customization Scope

Leather species and thickness can be specified — goat skin is the standard shell and palm, with sheep skin or cowhide available for programmes that need a softer hand feel or a heavier gauge. Stitching colour is a specification item rather than a fixed detail, which is why the sample carries an olive contrast stitch on black. Heating can be extended to the palm or reduced to the back of the hand only, and element output is matched to the pack and controller chosen. Controller interface, cuff closure, lining weight, insulation, logo method and retail packaging are open to specification.

Heating System and Controller

The standard build uses a 7.4 V system drawing 7.5 W per glove, with elements running through all five fingers and the back of the hand. A single button on the back of the hand cycles three levels, and a colour ring shows the active setting. Temperature bands and runtime are stated below for the sample build; both shift when element layout, pack capacity or insulation is changed, so the final figures are confirmed at sample stage rather than assumed from the catalogue.

Leather Shell and Palm Construction

The back of the hand and the palm are both goat skin. A separate reinforced patch is stitched onto the palm where wear concentrates, and conductive goat leather is used at the fingertips so the glove works on a touchscreen without removal. Twill fabric is used at the thumb side and the cuff to keep weight and bulk down where leather adds nothing. Seams are double-stitched along the finger sides and the palm patch edge.

Cuff, Retention and Gauntlet Fit

The cuff is an extended gauntlet that sits over a jacket sleeve rather than under it. Retention is a webbing buckle across the wrist plus an elastic drawcord at the cuff opening, and a zip pocket sits on the side of the gauntlet for a pass or key. The cuff opening is gathered with an elastic band so it closes against the sleeve without a second strap. Gauntlet length, buckle type and pocket placement are all specification items.

Battery Pack

Two 7.4 V 3200 mAh packs are supplied as standard, one per glove, charged through an 8.4 V 1.5 A dual charger. Packs sit in a pocket inside the gauntlet, which keeps the weight behind the wrist instead of on the back of the hand. Capacity, pack shape and pocket position can be changed for programmes that need a longer runtime or a slimmer cuff.

Sizing and Fit Development

The base pattern runs S to 2XL. For private-label work we develop against the brand’s own size chart rather than forcing a stock grading: palm circumference, palm length and finger length are measured on the brand’s target fit model, and a fit sample is signed off before production tooling is set. Width across the knuckles and thumb length are the two dimensions that most often need adjustment between markets.

Compliance and Documentation

The glove and its electrical parts are covered by CE, RoHS, FCC, ETL, UN38.3 and MSDS documentation. Certificates are issued against the specific configuration ordered, so the file references the battery and charger actually used rather than a generic listing. Copies are available on request during evaluation, and the certificate set is confirmed before mass production starts.

Sampling and Order Flow

A programme normally starts with a specification sheet, then a sample pair built to that sheet, then a signed sample before bulk. Minimum order quantity is assessed per project rather than fixed at a single number, because leather sourcing, stitching colour and packaging all move the economic batch size. Lead time is quoted against the confirmed sample and the leather selected.

Specifications

Specification Details
Model JHG03
Type Heated Ski Gloves, OEM/ODM Platform
Color Black with Olive Contrast Stitching (Custom Colourways Available)
Shell Full Goat-Skin Leather
Palm Goat-Skin Leather with Reinforced Palm Patch
Back of Hand Goat-Skin Leather
Cuff Extended Gauntlet with Webbing Buckle and Drawcord
Closure Webbing Buckle with Elastic Drawcord
Heating Zone Back of Hand and All Five Fingers
Heating Element 7.4V, 7.5W per Glove
Controller Single Button, Three Levels with Colour Indicator
Temp. Settings 3 Levels (Green / Blue / Red)
Level 1 (Green) 40-45°C (104-113°F) / 8 Hours
Level 2 (Blue) 50-55°C (122-131°F) / 5 Hours
Level 3 (Red) 60-65°C (140-149°F) / 2.5 Hours
Battery 7.4V 3200mAh, Two Packs Included
Charger 8.4V 1.5A Dual Charger
Sizes S / M / L / XL / 2XL
Lining Velvet Fleece with Warming Cotton
Customization Leather, Stitch Colour, Heating Zones, Controller, Logo, Sizing, Packaging
MOQ Flexible, Assessed per Project
Certification CE / RoHS / FCC / ETL / UN38.3 / MSDS

FAQ

Is the whole glove leather?

The back of the hand and the palm are goat skin. Twill fabric is used at the thumb side and the cuff to reduce bulk, and the fingertips are conductive goat leather for touchscreen use.

Can the stitching colour be changed?

Yes. Stitch colour is specified per order, and the sample shown uses an olive contrast stitch on black.

Does heating cover the fingers?

Yes. Elements run through all five fingers and across the back of the hand. Palm heating can be added as a specification option.

Can we use our own size grading?

Yes. We develop against the brand’s size chart and sign off a fit sample before production.

What is the minimum order?

MOQ is assessed per project. Leather selection, stitch colour and packaging all affect the batch size, so it is quoted against the confirmed specification.

Reviews

There are no reviews yet.

Be the first to review “JHG03 Full-Leather Heated Ski Gloves”

Your email address will not be published. Required fields are marked *