Microfiber Ski Glove Platform for Brand and Distributor Programs
JHG24 is an all-black heated ski glove built on a microfiber palm rather than leather. That choice is deliberate: microfiber holds a silicone anti-slip print better than a grain leather face, it stays supple in the cold without breaking in, and it lets a programme hit a lower unit cost at the same cuff length. The shell is waterproof twill, the fingertips are conductive microfiber, and heating runs across the back of the hand and all five fingers on a 7.4 V system with a three-level button. Shell fabric, grip pattern, heating layout, controller, cuff hardware, sizing, logo and packaging are all set per project.
Customization Scope
The palm is microfiber with a silicone anti-slip print as standard; the print pattern can be re-cut for a brand that wants its own grip layout. Shell fabric can stay on waterproof twill, move to a heavier twill, or change to a softshell face for a softer hand. Colour is a specification item — the sample is all black, and the same pattern is available in a two-tone build or with a contrast stitch. Heating can be extended to the palm side or reduced to the back of the hand only. Controller interface, cuff closure, lining weight, battery capacity, logo method and retail packaging are open to specification.
Heating System and Controller
The standard build uses a 7.4 V system drawing 7.5 W per glove, with elements running through all five fingers and across the back of the hand. A single button set into the gauntlet cycles three levels, and an indicator ring on the same button shows the active setting. Temperature bands and runtime are listed in the specification table for the sample build; both move when element area, pack capacity or insulation is changed, so final figures are confirmed at sample stage rather than carried over from the catalogue.
Shell, Palm Grip and Insulation
The shell is waterproof twill with a taped construction behind the seams. The palm is microfiber carrying a silicone anti-slip print, which is what keeps a pole or a shovel handle from rotating in the hand once the glove is warm and the liner has softened. Thumb and index fingertips are conductive microfiber, so a phone or a lift pass works without taking the glove off. Behind the shell sits a velvet lining over insulation cotton. Fabric weight, print pattern, membrane specification and lining weight are specification items.
Cuff, Retention and Gauntlet Fit
The cuff is an extended gauntlet that closes over a jacket sleeve, held by a webbing buckle across the wrist and an elastic drawcord at the opening. A waterproof zip pocket on the side of the gauntlet takes a pass, a key or a spare pack, and the battery sits in a separate waterproof pouch inside the cuff. Gauntlet length, buckle type, pocket placement and drawcord hardware are specification items.
Battery Pack
Packs are supplied two per pair, one per glove, in 7.4 V 3200 mAh or 2200 mAh, and charge through an 8.4 V 1.5 A dual charger. Both capacities are offered as options rather than one being the default: the 2200 mAh pack suits a slimmer cuff or a shorter session, the 3200 mAh pack suits longer days on the hill. The pack sits in the cuff pouch rather than on the back of the hand, which keeps the weight behind the wrist. Capacity, pack shape and pouch position can be changed for programmes that need a longer runtime or a slimmer cuff.
Sizing and Fit Development
The base pattern runs S to 2XL. For private-label work we develop against the brand’s own size chart rather than forcing a stock grading: palm circumference, palm length and finger length are measured on the target fit model, and a fit sample is signed off before production tooling is set. Width across the knuckles and thumb length are the two dimensions that most often need adjustment between markets, and a cuff that has to sit over a bulky jacket sleeve is checked on the same fit sample.
Compliance and Documentation
The glove and its electrical parts are covered by CE, RoHS, FCC, ETL, UN38.3 and MSDS documentation. Certificates are issued against the specific configuration ordered, so the file references the battery and charger actually used rather than a generic listing. Copies are available on request during evaluation, and the certificate set is confirmed before mass production starts.
Sampling and Order Flow
A programme normally starts with a specification sheet, then a sample pair built to that sheet, then a signed sample before bulk. Minimum order quantity is assessed per project rather than fixed at a single number, because fabric sourcing, print tooling and packaging all move the economic batch size. Lead time is quoted against the confirmed sample and the materials selected.
Specifications
| Specification | Details |
|---|---|
| Model | JHG24 |
| Type | Heated Ski Gloves, OEM/ODM Platform |
| Color | Black (Custom Colourways Available) |
| Shell | Waterproof Twill Fabric |
| Palm | Microfiber with Silicone Anti-Slip Print |
| Fingertips | Conductive Microfiber (Thumb and Index) |
| Cuff | Extended Gauntlet with Webbing Buckle and Drawcord |
| Waterproof Zip Pocket on Gauntlet | |
| Heating Zone | Back of Hand and All Five Fingers |
| Heating Element | 7.4V, 7.5W per Glove |
| Controller | Single Button, Three Levels with Indicator Ring |
| Temp. Settings | 3 Levels (High / Medium / Low) |
| Level 3 (High) | 60-65°C (140-149°F) / 2-2.5 Hours |
| Level 2 (Middle) | 50-55°C (122-131°F) / 4.5-5 Hours |
| Level 1 (Low) | 40-45°C (104-113°F) / 8.5-9 Hours |
| Battery | 7.4V 3200mAh / 2200mAh (Two Options), Two Packs Included |
| Charger | 8.4V 1.5A Dual Charger |
| Sizes | S / M / L / XL / 2XL |
| Lining | Velvet with Insulation Cotton |
| Customization | Shell Fabric, Grip Pattern, Heating Zones, Controller, Battery Capacity, Logo, Sizing, Packaging |
| MOQ | Flexible, Assessed per Project |
| Certification | CE / RoHS / FCC / ETL / UN38.3 / MSDS |
FAQ
What is the palm made of?
Microfiber with a silicone anti-slip print. It is not leather, which is what keeps the cost down and the palm supple without a break-in period.
Does heating cover the fingers?
Yes. Elements run through all five fingers and across the back of the hand. Palm heating can be added as a specification option.
Is the glove touchscreen compatible?
The thumb and index fingertips are conductive microfiber, so a phone or a lift pass works with the glove on. Full-hand conductive coverage is a specification option.
Can the grip pattern be changed?
Yes. The silicone print is cut from a tool, so a brand can supply its own pattern or have one drawn for its range.
What is the minimum order?
MOQ is assessed per project. Fabric selection, print tooling and packaging all affect the batch size, so it is quoted against the confirmed specification.


















Reviews
There are no reviews yet.